Description
The laser cut brackets for the mustang II spindles will support all the GM Brembo conversions using the 14mm caliper bolt (all brakes except for CTSV-1 & LS1). These brackets can be used with stock or aftermarket spindles. The installation requires welding the upper mounting stud to the bracket once the assembly is final. We have used our std 5×4.75 hub with this conversion that is popular with GM brake swaps on this spindle. CTS-V2 , Camaro Gen V, VI, ZL1, C7 corvette Brakes, ATS, XTS Cadillac also can all be used with this bracket. Some conversions will require rotor pilot hole enlargement. Rotor sizes 11.8. 12.6,13.6, 14.0 and 14.6 and calipers from 2 piston, 4 piston and 6 piston. Large wheels with offset spokes for Brembo calipers required. Rear conversions are also available for many popular axles.
Included;
- 2 base brackets
- 2 .200 thick aluminum spacers 7/16 ID
- 4 caliper stand offs .295 thick 14mm ID
- 2 upper weldable stud, nut, washer
- mounting hardware for brackets and calipers
Reviews
There are no reviews yet.