Big Ford (Early) Brembo Conversion Brackets 1/2 bolts – For park brake use

Description

For the Old Style Big Ford ends using the 1/2 bolt holes on the flange.  These brackets and spacers will mount all the popular GM based brembo rear brakes  (not included but pictured are modified 2010-15 Camaro SS backing plates)  Complete the set-up with our cable mounts & spacers.   The Big Ford brackets are step bored to retain the 3.155 bearing.  Typical step bore depths are .155-.185 on most axles we have measured, contact us with your measurement for an exact fit.  A flat retainer bracket used over the brake plate is recommended to reinforce the step bore.  For 2.50 offset (1/2 backing plate spacer)  Contact us for 2.35 offset we can have 3/8 spacers made to order.

Fitment: 66-’70 full size Fords and Mercurys, ‘71-’72 Lincolns and ‘68-’72 F100 Ford trucks ‘79-’81 Lincoln Versailles and ‘77-’80 Ford Granada rear axles

• Brembo to Big Ford Old style brackets w/ step bore
• Billet aluminum park brake spacers
• Mounting hardware for bracket and caliper

Optional items:

• Billet park cable mount spacers and brackets